Categories
All Products
Designed and 3D printed in house, our Stick-On Flat-Deck Tacktick Bracket is the perfect solution for mounting your Tacktick Microcompass to your deck.
Featuring the same recessed nut system that you'd find on our mast brackets, and compatible with both our cradles and the OEM tacktick cradle.
We've designed the bracket with a slight angle so your compass is held at a position where it's easy to read the numbers.
The bracket attaches to your hull using a 3M VHB pad, this is super-sticky, super-strong, and easy to fit. Perfect for a more permanent solution compared to our removable ILCA/Laser Deck Bracket.
Available in a variety of colours, mix and match with our 3D printed cradles for a colour combo that really POPS!
Sun‑ready, spray‑proof (ish), and built for long days in the boat park.
The FM Sailing Cap is your everyday essential for rigging, racing, coaching, or just looking vaguely competent while carrying a mainsheet. Finished with crisp FM embroidery by Tight Five Designs, it’s practical, durable, and made for sailors who spend more time outdoors than indoors.
Built for real sailing conditions
Curved protective peak
Cuts down glare on open water, helps you actually see the start line, and keeps the sun out of your eyes when you’re trying to look cool in the boat park.Lightweight, quick‑drying fabric
Comfortable from first hoist to last pint, even after a surprise wave or an over‑athletic roll-tack.Breathable eyelets
Keeps your head comfortable during mark‑rounding chaos, hot slipway queues, and those rare scorchers we occasionally referred to as “summer”.Adjustable rear strap
Dial in the perfect fit - forwards, backwards, or if you wanna be really down with the kids “sideways”.Low‑profile, boatpark‑ready design
Soft, packable, and easy to shove into a kit bag without it turning into a crushed pancake.
Whether you’re running a start line, coaching juniors, cruising upriver, or enjoying a post‑sail pint, this cap is made to be worn hard and loved long. It’s rugged, reliable, and ready for whatever the day throws at you.
Designed & 3D printed in house, and tested to success - on it’s first outing on the water being used to finish 2nd at the RS500 worlds 2025, our extended tacktick mast bracket is the perfect way to jazz up your boat.
We print using a robust, UV stable filament, which means you can buy with confidence knowing that you’re not getting a cheap knock off that’s going to shrink, distort, or break after a week.
Our bracket works in conjunction with the Raymarine Tacktick Microcompass, which is class legal on many dinghies.
Key Features:
Recesses for your nyloc nuts, so it’s easier to screw your cradle on, no need for a spanner or pliers!
Locating fins on the rear of the bracket slot into the mast track and stop the bracket from being knocked side to side. (Standard extended bracket only)
ProGrip Pads on the rear of the bracket help to pad the bracket against the mast section.
Helpful “Tack on +” & “Tack on -” text to help you know if you’re on a lift or a header.
Standard extended mast brackets will be supplied with all fixings required to connect a cradle, a length of doublesided velcro to strap round the mast, and a length of sticky-back velcro which applies to the front face of the mast and holds the bracket in place.
The 29er Style extended bracket has the fins removed, and has holes for dyneema & shockcord instead of slots for velcro - as this attachment method is favoured by 29er sailors.
Designed and 3D printed in house, the FM Claw gives you the extra holding power when your hands are full.
Use the handy peg-style clip to keep your kite in its bag while sailing upwind, to keep your lines tidy and in place, to hold your sheets so they’re easily accessible … the options are endless!
Splice or tie the FM Claw to your boat/rig/trapeze harness with the supplied length of dyneema.
Available in several colour options, £7.50 each or £12 for a pair.
If you are after a rig gauge that will give you accurate readings time after time then the Rig Gauge PRO is for you.
The BEST materials have been used in each area of the rig gauge so that you get repeatable readings for years to come. Other rig tension gauges on the market use plastic rollers and components which after a short amount of time start to wear. Once the components start to wear, it affects the readings that the gauge gives you. Which ultimately affects the performance of your rig, boat and boat speed.
The Sea Sure Rig Gauge PRO uses 316 stainless steel rollers, and a blend of aircraft grade aluminium and 316 stainless steel components in the pointer arm. All main contact points within the rig gauge are manufactured from 316 stainless steel. We do this as they will wear far less, over a much longer period of time, giving you more repeatable reliable readings when tuning your rig.
The Scale used within the Rig gauge Pro resembles that of the most popular rig gauge currently used on the market, so you don't have to re learn your settings in Kg's, pounds etc.
The Rig Gauge PRO has been designed to be much nicer to use and hold, featuring a hand hold shape within the aluminium body. The body also has a 150mm rule so that you can measure mast deflection as well as a range of other rig settings without the need of a tape measure.
The Rig Gauge PRO comes complete with a padded bag to keep it safe from damage when its in your rig bag or tool box.
The first and best continuous loop control lines. The special snakeskin pattern means end-to-end, endless loop splicing with no diameter increase is much easier - Use a wire splicing needle (pullfid) for best splicing results. Technora cover provides grip as well as heat and abrasion resistance and the distinctive colours aids easy identification.
BENEFITS:
Easy end-to-end splicing
Good abrasion resistance
Flexible product and easily handled
Excellent Heat Resistance
Good strength
Good UV resistance
Break Load
4mm - 478kg
Our tidy takeup kits offer a clean, screwless solution for fitting continuous control lines to your dinghy - no drilling, no mess, no fuss.
Each kit includes:
2 x 3D‑printed pads ready to bond to the hull with a 3M VHB adhesive pad
2 x spliced rings (or four, if you choose the double kit) - Low Friction Rings ensure your lines run free and smooth with minimal snags
Rope - Marlow Excel Control, the ideal choice for continuous systems thanks to its smooth snakeskin cover, easy endless‑loop splicing, great grip and high resistance to heat and abrasion
Single kit: 1 × 10m lengths
Double kit: 2 × 10m lengths
No Rope Option - if you want to buy a custom length of Excel Control (or whichever rope takes your fancy!)
This is enough rope to rig most dinghies - if you're unsure, just get in touch.
This is our simplest way to keep your control lines tidy and continuous, without adding holes to your hull. Designed for sailors who want neat rigging, fast fitting, and no compromise on performance.
Tested to success - this setup has powered two Graduate National Championship wins using the double tidy takeup system.
3D printed replica Melges 15 Transom Flap (scupper flap) set.
Elasticated, with a progrip backing to maintain a watertight seal.
Suitable for use on GP14s and ready to win races, look no further than the FM Sailing GP14 Carbon Fibre Tiller Extension.
We offer the GP14 extension in a short or long version, depending on your personal preference, the short version comes out at 1.0m and is the length used by Ferg Barnham & Fresh at the GP14 Worlds in 2024, and the long version is 1.1m and was the length used by Ben Iliffe & Fresh at the GP14 Nationals in 2019. It all comes down to personal preference, the length of your arms, legs, how easy you find it to pass the extension inside the mainsheet during tacks… your best bet is to measure your current tiller extension and go off that!
Superlight, superstiff, and superfast, our tubes are pullwound and manufactured in an epoxy matrix.
The carbon fibre is multi-layered, internally pull braided, and externally wound with a double helix braid. This provides exceptional resistance to bending and torsional forces.
We think this makes our tiller extensions a cut above the rest.
But as well as being high performance, we also wanted our tiller extensions to be more personal, so we made them super-customisable!
3 different tube diameters to choose from, depending on whether you like it slender, chunky, or somewhere inbetween.
3D printed end knobs available in a variety of colours, and with a chunky or streamlined profile.
Heatshrink grip tubing, available in a variety of colours, or not at all!
3D printed inserts, so your Universal Joint (UJ) fits perfectly, and is easy to replace.
Choice of Allen or Seasure Universal Joint (UJ)
Upon adding product to cart, you will be prompted to fill out our customization form to pick your heatshrink grip colours .etc.
Rooster’s new and improved SuperTherm® Neoprene Top designed specifically for women, features a fast-drying, soft lining throughout for exceptional warmth in extreme conditions. Building upon the success of the Azure version, Rooster have incorporated feedback from customers, female focus groups, and material/technology advancements to enhance every aspect of this garment.
The contoured panel layout, complemented by carefully curated colours and styling, ensures a comfortable and flattering fit. Engineered with varying thicknesses across the panels, this top maximizes comfort and manoeuvrability, making it the ideal choice for active pursuits on the water.
In their latest iteration, Rooster have introduced a super heat-boosting wicking lining on the back panel. When paired with the Womens SuperTherm® longjohn, this addition provides all round warmth to the core, ensuring comfort in even the harshest conditions.
Features:
Seams and panel layout add shape to female body (waist, chest and arms)
Black panels at sides create a flattering fit
Long length to fit better
Reinforced stitch line slightly up from cuff for capability to cut sleeves for shorter arm lengths
Quick dry thermal lining throughout with a super wicking heat boost back panel
For those who love the soft agility of the Aquafleece® as a top layer but would like the added security of a semi-dry construction, Rooster have developed the Rooster Pro Aquafleece®.
Utilising their stretchy waterproof Aquafleece® fabric, Rooster use a heavier fleece lining on the Pro-Aquafleece® top and tape the seams to provide superior warmth and wind/water protection, whilst allowing for free movement. The taped seams protect from any water ingress and when combined with neoprene wrist and waist fastenings, a wide fleecy neck and elasticated drawstring neck closure, it offers the ultimate semi-dry top for protection in the harshest of climates.
The ultimate top layer for all conditions!
We recommend hand washing in warm water.
FEATURES
Warm fleece lining for even more warmth and comfort in the harshest of climates
Taped seams, for added waterproof protection in the body
Wide neck opening with elasticated drawstring neck closure
Soft fleece at neck edge for comfort against your face
Adjustable neoprene waist and wrist seals
Semi dry construction
For those who love the soft agility of the Aquafleece® as a top layer but would like the added security of a semi-dry construction Rooster have developed the Rooster Pro Aquafleece®.
Utilising their stretchy waterproof Aquafleece® fabric, Rooster use a heavier fleece lining on the Pro-Aquafleece® top and tape the seams to provide superior warmth and wind/water protection, whilst allowing for free movement. The taped seams protect from any water ingress and when combined with neoprene wrist and waist fastenings, a wide fleecy neck and elasticated drawstring neck closure, it offers the ultimate semi-dry top for protection in the harshest of climates.
The ultimate top layer for all conditions!
We recommend hand washing in warm water.
FEATURES
The ultimate top layer for all conditions
Combines all the benefits of the Aquafleece with the added security of Semi Dry construction
Upgraded fleece lining for even more warmth and comfort in the harshest of climates
Taped seams to improve water resistance
Elasticated, adjustable neck bungee and neoprene waist and wrist seals
Once you try Aquafleece® you’ll never look back!
Manufactured from a material developed by Rooster in conjunction with a leading technical fabric manufacturer. This top has a Polyurethane coating on the outside for water resistance, durability and flexibility combined with a fleece inner layer to keep you snug and warm - a combination that works well when wet or dry. It can either be worn under your hikers as a base layer, mid layer or as a top layer over them. This really has got to be one of the most exciting timeless products that Rooster have ever developed!
We recommend hand washing in warm water.
FEATURES
Water resistant construction
Soft light fleece lining for warmth and comfort in all climates
Seams are not taped so perfect crossover top for a range of temperatures
Elasticated adjustable neck bungee
Soft fleece at neck edge for comfort against your face
Tight fitting at hem/hips to maintain position on body
Once you try Aquafleece® you’ll never look back!
Manufactured from a material developed by Rooster in conjunction with a leading technical fabric manufacturer. This top has a Polyurethane coating on the outside for water resistance, durability and flexibility combined with a fleece inner layer to keep you snug and warm - a combination that works well when wet or dry. It can either be worn under your hikers as a base layer, mid layer or as a top layer over them. This really has got to be one of the most exciting timeless products that Rooster have ever developed!
Washing Instructions:
We recommend hand washing in warm water.
FEATURES
Water resistant construction
Soft light fleece lining for warmth and comfort in all climates
Seams are not taped so perfect crossover top for a range of temperatures
Elasticated adjustable neck bungee
soft fleece at neck edge for comfort against your face
Tight fitting at hem/hips to maintain position on body
Thumb loops at sleeve cuff
2000 Dinghy Spinnaker Halyard, made from Marlow 8 Plait Pre-stretched polyester rope.
Low stretch, flexible so it runs smoothly, and grips well in the cleat and the hand, 8 plait pre-stretched polyester is a fantastic line for a spinnaker halyard.
Compliant with the 2000 class rules, and ready to get your kite up quicker than a caffeine-fuelled dolphin on race day!
Available in a longer “helm hoist” or a shorter “crew hoist” length, depending on whether you run your halyard to the back of the boat for the helm, or straight from the cleat to the retrieval block for the crew.
Suitable for both the Laser 2000 and RS built 2000s.
Tried and tested pre-stretched control line for multiple applications. Strong, very low stretch, abrasion resistant and excellent grip - the all round workhorse.
We recommend the 4mm line as a great option for dinghy spinnaker halyards.
It is low stretch, low kink, and runs smoothly (because it is flexible) while gripping well in both hands and cleats (because of its 8 plait construction).
BENEFITS:
Easy line identification
Excellent cleat performance
Good strength
Low elongation
Good abrasion resistance
The Polypro top is a warm, thermal base layer top with a soft fleece surface on the inside. The longer length and thumb loops mean that it is easy to slip other layers over the top. A high rise double lined neck gives that extra bit of comfort.
Rooster Polypro™ is constructed from a combination of Polypropylene (94%) and Elastane (6%). Rooster have brushed the inner fabric surface to give it a thick, fleece-like, high quality texture which feels incredibly warm and soft next to your skin. The resulting garments provides excellent thermal qualities making it the perfect base layer.
Polypropylene is naturally hydrophobic, which means the fabric feels remarkably dry, even when wet. Wear it next to your skin underneath a neoprene Longjohn and Top - in fact the possibilities are endless - Rooster Polypro™ base layers would be great under your ski suit, drysuit, winter cycling, kayaking, walking and anytime you need a thermal base layer…
NOTE ON SIZING: This garment is designed to be tight-fitting. Due to the stretch of the fabric and the design of the top, it might look smaller than your body when not worn, but rest assured it will stretch to be nice and snug. (Scroll to the bottom of the page for the Size Guide)
WASHING:
We recommend hand washing in warm water.
When they need more freshening up than just rinsing with water, use some Grangers Performance Wash or a small amount of non-bio detergent (do not use any softener as this can damage the fabric) on a low heat/low spin setting in the washing machine (max 20 degrees Celcius/800 spin).
FEATURES
Breathable polypropylene material wicks moisture away from the body
Quick Drying
Thumb loops at cuffs
Long length - easy to tuck into other garments
Double lined high nick collar
The Polypro top is a warm, thermal base layer top with a soft fleece surface on the inside. The longer length and thumb loops mean that it is easy to slip other layers over the top. A high rise double lined neck gives that extra bit of comfort.
Rooster Polypro™ is constructed from a combination of Polypropylene (94%) and Elastane (6%). Rooster have brushed the inner fabric surface to give it a thick, fleece-like, high quality texture which feels incredibly warm and soft next to your skin. The resulting garments provides excellent thermal qualities making it the perfect base layer.
Polypropylene is naturally hydrophobic, which means the fabric feels remarkably dry, even when wet. Wear it next to your skin underneath a neoprene Longjohn and Top - in fact the possibilities are endless - Rooster Polypro™ base layers would be great under your ski suit, drysuit, winter cycling, kayaking, walking and anytime you need a thermal base layer…
NOTE ON SIZING: This garment is designed to be tight-fitting. Due to the stretch of the fabric and the design of the top, it might look smaller than your body when not worn, but rest assured it will stretch to be nice and snug. (Scroll to the bottom of the page for the Size Guide)
WASHING:
We recommend hand washing in warm water.
When they need more freshening up than just rinsing with water, use some Grangers Performance Wash or a small amount of non-bio detergent (do not use any softener as this can damage the fabric) on a low heat/low spin setting in the washing machine (max 20 degrees Celcius/800 spin).
FEATURES
Breathable polypropylene material wicks moisture away from the body
Quick Drying
Thumb loops at cuffs
Long length - easy to tuck into other garments
Double lined high nick collar
New and revamped, the latest iteration of the SuperTherm top has enhanced features, an improved fit and is the most durable version yet. It uses 4mm Limestone based neoprene throughout with a thermal wicking lining for the ultimate dry and warm feeling. The top has a quick dry super soft back panel designed to work in conjunction with the SuperTherm® Longjohn, which has a quick dry panel at the front in order to provide superior warmth and comfort around the entire core when worn together.
Features:
Quick dry thermal lining throughout with a super wicking heat boost panel at inside back
GBS (Glued & Blind Stitched)
Unrestrictive fit - Precurved arms to aid movement
Raw edge neck and sleeve cuffs to minimise bulk and aid in comfort
Slightly thinner cuffs for extra comfort when wearing a watch / gloves
Once you try Aquafleece® you’ll never look back!
Manufactured from a material developed by Rooster in conjunction with a leading technical fabric manufacturer. This top has a Polyurethane coating on the outside for water resistance, durability and flexibility combined with a fleece inner layer to keep you snug and warm - a combination that works well when wet or dry. It can either be worn under your hikers as a base layer, mid layer or as a top layer over them. This really has got to be one of the most exciting timeless products that Rooster have ever developed!
We recommend hand washing in warm water.
FEATURES
Water resistant construction
Soft light fleece lining for warmth and comfort in all climates
Seams are not taped so perfect crossover top for a range of temperatures
Elasticated adjustable neck bungee
Soft fleece at neck edge for comfort against your face
Tight fitting at hem/hips to maintain position on body
Specific Women's fit
Rooster’s latest iteration of the Supertherm longjohns, meticulously refined for optimal comfort and functionality on the water. Building upon the success of the Azure version, Rooster have incorporated feedback from customers, female focus groups, and material/technology advancements to enhance every aspect of this garment.
Crafted from Superstretch neoprene with GBS (glued blind stitching) and a thermal lining throughout, these longjohns offer superior warmth. Additionally, a specialised heat-boosting lining at the chest ensures core warmth in harsh conditions. The strategic panel design, varying in thickness from 3.5mm to 4mm, enhances comfort and manoeuvrability.
Improvements to the upper body include a wider racer back/shoulder fit for better stability, particularly in dinghy sailing. Enhanced support in key panels ensures an optimal fit. The knees and seat feature our durable Duratex II reinforced fabric, renowned for its ability to withstand abrasive surfaces.
Designed for versatility, these longjohns can be used with or without hike pads, thanks to a plush inside seat surface. The extended leg length, with the option to cut to two shorter lengths, features a silicone print to prevent slippage and drainage holes for enhanced comfort.
For the ultimate winter outfit, pair with the Women's Supertherm® Top for all round warmth.
Features:
Seams and panel layout add shape to female body (waist, chest and arms)
Black panels at sides create a flattering fit
Quick dry thermal lining throughout with a super wicking heat boost panel?inside chest
Racer back to aid movement and comfort
Front chest zip with popper stopper at top
ProHike Pad Compatible
Duratex IITM at seat and knee/shin panels with additional padding
Silicon print on inside of ankles
2 x Reinforced seams at lower legs for capability to cut legs to a shorter length
Prebent legs and body for optimum fit in watersport applications
Drainage holes at back of lower legs for quick flushing
GBS (Glued & Blind Stitched)
Materials:
Limestone Neoprene
Duratex IITM
Long, durable, breathable, dinghy sail bags with 2 easi-carry handles and a drawstring closure at one end. See size chart below to see which bag is suitable for your sail.
Durable, breathable, dual purpose spinnaker/folded sail bag with a drawstring closure.
Size: 660mm x 660mm
Suitable for most dinghy spinnakers and smaller folded sails.
Measure Wind with Precision - The Windie 360 Handheld Anemometer
The Windie 360 Anemometer is the ultimate wind-measuring tool for sailors and watersports enthusiasts. This handheld Anemometer device offers accurate, reliable, and immediate wind speed data, giving you a competitive edge whether you're racing or planning your day on the water. It's the perfect tool for any weather conditions, designed for ease of use and durability.
Key Features and Benefits:
360° Wind Measurement: The top propeller design allows for accurate wind readings from any direction, eliminating the need to point the device directly into the wind. This ensures consistent results, regardless of the wind's changing direction.
One-Handed Operation: Designed to fit comfortably in your palm, the Windie360 can be operated with just one hand. This frees up your other hand for other tasks, such as adjusting sails or holding onto your boat.
Durable Construction: The anemometer features a protective cage around the sensitive rotating cups, making it resistant to knocks and bangs. This robust design means it can be easily carried in your pocket without fear of damage.
Long-Lasting Battery: Powered by readily available AAA batteries, the Windie360 provides up to 40 hours of battery life. The device also includes a small screwdriver for easy battery replacement.
Included Accessories: The Windie360 comes with a free fabric cover for safe storage AND a free “selfie stick” style monopod holder - saving you from getting a sore arm after waving the anemometer around trying to find the breeze!
User-Friendly: Designed for ease of use, making it ideal for both professional and recreational use.
Warranty and Guarantee: Comes with Windie’s 2-year warranty, giving you that peace of mind.
Rooster’s newest generation Supertherm® Longjohn developed using improved fabrics, an updated fit, and enhanced features. The longjohn has a quick dry super soft front panel engineered to work seamlessly with the Supertherm® Top, which has its own quick dry panel at the back so when combined they deliver unmatched warmth and comfort. The longjohn has an enhanced relief flap with a triple layer construction to reduce water inlet. Designed as a staple in our layering system, can be combined with a large variety of tops and base layers to work in a large range of conditions. Highly recommended for colder weather and for individuals that feel the cold more.
Features:
Prebent legs and body for optimum fit in watersport applications
Clean entry system with no Velcro
Quick dry thermal lining throughout with a super wicking heat boost panel inside chest
Triple layer relief flap at crotch
ProHike Pad Compatible
Silicon print on inside of ankles
Reinforced seams at lower legs for capability to cut legs to two different lengths
Drainage holes at back of lower legs for quick flushing
GBS (Glued & Blind Stitched)
Slightly thinner neoprene on the backs on the knees to aid with flexibility and movement
Reinforced knee panel with extra padding
Debossing on lower back for improved flexibility
Materials:
Duratex II seat and knee panels (you’ll be glad to hear we’ve switched back to Duratex II for its proven unmatched durability on the water)
Limestone Neoprene
Do you have a glorious mullet that needs to roam free? Do you get really bad hat hair but need a stiff peak to keep the sun out of your eyes?
Designed to keep the sun out of your eyes and your head cool, the Rooster visor is one of the first items in Fresh’s kitbag .
Designed for water sports use with a plastic reinforced peak and adjustable head band, offering a comfortable fit for many happy hours on the water.
Available in black, white, red, blue, and graphite.
Product care:
Hand wash in warm soapy water and allow to air dry.
Ever found yourself fumbling to get your Tacktick into countdown mode just as the sequence starts? Or wishing you could still see your compass heading while your race timer is running?
We put this together to solve exactly that problem.
This simple bolt-on module lets you mount your Optimum Time “Big Yellow” Race Watch or Windie Race Timer directly onto your Tacktick mast bracket. It keeps everything in one place, so you can see your heading and your countdown at the same time - no more choosing one over the other.
A Proper Secure Fit (No More Tape)
Most flexible cradles work… until they don’t. And nearly everyone ends up taping their watch in to stop it jumping out at the wrong moment.
Instead, we’ve designed a threaded enclosure that holds your race timer securely in place. It won’t shake loose in chop, but it’s still quick and easy to remove once you’re off the water.
No tape. No bodges. No stress.
Designed to Fit Straight On
The hole centres match our standard 3D printed Tacktick Mast Brackets and Cradles, so it bolts straight on. It’s also compatible with OEM Tacktick brackets, so you don’t need to change your existing setup.
If you’re already running a Tacktick and using a “Big Yellow” or a Windie watch, this is a straightforward upgrade that makes race starts that bit easier.
Simple idea. Proper solution. Built by sailors, for sailors.
Bundle the Race Watch Module with a Windie Race Watch to save yourself £10 off RRP
Ready to win races, look no further than the FM Sailing RS200 Carbon Fibre Tiller Extension.
Superlight, superstiff, and superfast, our tubes are pullwound and manufactured in an epoxy matrix.
The carbon fibre is multi-layered, internally pull braided, and externally wound with a double helix braid. This provides exceptional resistance to bending and torsional forces.
We think this makes our tiller extensions a cut above the rest.
But as well as being high performance, we also wanted our tiller extensions to be more personal, so we made them super-customisable!
3 different tube diameters to choose from, depending on whether you like it slender, chunky, or somewhere inbetween.
3D printed end knobs available in a variety of colours, and with a chunky or streamlined profile.
Heatshrink grip tubing, available in a variety of colours, or not at all!
3D printed inserts, so your Universal Joint (UJ) fits perfectly, and is easy to replace.
Choice of Allen or Seasure Universal Joint (UJ)
Upon adding product to cart, you will be prompted to fill out our customization form to pick your heatshrink grip colours .etc.
Neoprene sleeve bottle holder with adjustable webbing straps at each end to fit around different circumferences of tube. Can be attached to various parts of the boat to store drinks when sailing. The bottle holder features an oval hole to be able to slide the bottle in with one hand. Can fit most bottles up to 1L in size. The Joey bottle holder is approx 38cm long
Designed and 3D printed in house, our Stick-On Flat-Deck Tacktick Bracket is the perfect solution for mounting your Tacktick Microcompass to your deck.
Featuring the same recessed nut system that you'd find on our mast brackets, and compatible with both our cradles and the OEM tacktick cradle.
We've designed the bracket with a slight angle so your compass is held at a position where it's easy to read the numbers.
The bracket attaches to your hull using a 3M VHB pad, this is super-sticky, super-strong, and easy to fit. Perfect for a more permanent solution compared to our removable ILCA/Laser Deck Bracket.
Available in a variety of colours, mix and match with our 3D printed cradles for a colour combo that really POPS!
Sun‑ready, spray‑proof (ish), and built for long days in the boat park.
The FM Sailing Cap is your everyday essential for rigging, racing, coaching, or just looking vaguely competent while carrying a mainsheet. Finished with crisp FM embroidery by Tight Five Designs, it’s practical, durable, and made for sailors who spend more time outdoors than indoors.
Built for real sailing conditions
Curved protective peak
Cuts down glare on open water, helps you actually see the start line, and keeps the sun out of your eyes when you’re trying to look cool in the boat park.Lightweight, quick‑drying fabric
Comfortable from first hoist to last pint, even after a surprise wave or an over‑athletic roll-tack.Breathable eyelets
Keeps your head comfortable during mark‑rounding chaos, hot slipway queues, and those rare scorchers we occasionally referred to as “summer”.Adjustable rear strap
Dial in the perfect fit - forwards, backwards, or if you wanna be really down with the kids “sideways”.Low‑profile, boatpark‑ready design
Soft, packable, and easy to shove into a kit bag without it turning into a crushed pancake.
Whether you’re running a start line, coaching juniors, cruising upriver, or enjoying a post‑sail pint, this cap is made to be worn hard and loved long. It’s rugged, reliable, and ready for whatever the day throws at you.
Designed & 3D printed in house, and tested to success - on it’s first outing on the water being used to finish 2nd at the RS500 worlds 2025, our extended tacktick mast bracket is the perfect way to jazz up your boat.
We print using a robust, UV stable filament, which means you can buy with confidence knowing that you’re not getting a cheap knock off that’s going to shrink, distort, or break after a week.
Our bracket works in conjunction with the Raymarine Tacktick Microcompass, which is class legal on many dinghies.
Key Features:
Recesses for your nyloc nuts, so it’s easier to screw your cradle on, no need for a spanner or pliers!
Locating fins on the rear of the bracket slot into the mast track and stop the bracket from being knocked side to side. (Standard extended bracket only)
ProGrip Pads on the rear of the bracket help to pad the bracket against the mast section.
Helpful “Tack on +” & “Tack on -” text to help you know if you’re on a lift or a header.
Standard extended mast brackets will be supplied with all fixings required to connect a cradle, a length of doublesided velcro to strap round the mast, and a length of sticky-back velcro which applies to the front face of the mast and holds the bracket in place.
The 29er Style extended bracket has the fins removed, and has holes for dyneema & shockcord instead of slots for velcro - as this attachment method is favoured by 29er sailors.
Designed and 3D printed in house, the FM Claw gives you the extra holding power when your hands are full.
Use the handy peg-style clip to keep your kite in its bag while sailing upwind, to keep your lines tidy and in place, to hold your sheets so they’re easily accessible … the options are endless!
Splice or tie the FM Claw to your boat/rig/trapeze harness with the supplied length of dyneema.
Available in several colour options, £7.50 each or £12 for a pair.
If you are after a rig gauge that will give you accurate readings time after time then the Rig Gauge PRO is for you.
The BEST materials have been used in each area of the rig gauge so that you get repeatable readings for years to come. Other rig tension gauges on the market use plastic rollers and components which after a short amount of time start to wear. Once the components start to wear, it affects the readings that the gauge gives you. Which ultimately affects the performance of your rig, boat and boat speed.
The Sea Sure Rig Gauge PRO uses 316 stainless steel rollers, and a blend of aircraft grade aluminium and 316 stainless steel components in the pointer arm. All main contact points within the rig gauge are manufactured from 316 stainless steel. We do this as they will wear far less, over a much longer period of time, giving you more repeatable reliable readings when tuning your rig.
The Scale used within the Rig gauge Pro resembles that of the most popular rig gauge currently used on the market, so you don't have to re learn your settings in Kg's, pounds etc.
The Rig Gauge PRO has been designed to be much nicer to use and hold, featuring a hand hold shape within the aluminium body. The body also has a 150mm rule so that you can measure mast deflection as well as a range of other rig settings without the need of a tape measure.
The Rig Gauge PRO comes complete with a padded bag to keep it safe from damage when its in your rig bag or tool box.
The first and best continuous loop control lines. The special snakeskin pattern means end-to-end, endless loop splicing with no diameter increase is much easier - Use a wire splicing needle (pullfid) for best splicing results. Technora cover provides grip as well as heat and abrasion resistance and the distinctive colours aids easy identification.
BENEFITS:
Easy end-to-end splicing
Good abrasion resistance
Flexible product and easily handled
Excellent Heat Resistance
Good strength
Good UV resistance
Break Load
4mm - 478kg
Our tidy takeup kits offer a clean, screwless solution for fitting continuous control lines to your dinghy - no drilling, no mess, no fuss.
Each kit includes:
2 x 3D‑printed pads ready to bond to the hull with a 3M VHB adhesive pad
2 x spliced rings (or four, if you choose the double kit) - Low Friction Rings ensure your lines run free and smooth with minimal snags
Rope - Marlow Excel Control, the ideal choice for continuous systems thanks to its smooth snakeskin cover, easy endless‑loop splicing, great grip and high resistance to heat and abrasion
Single kit: 1 × 10m lengths
Double kit: 2 × 10m lengths
No Rope Option - if you want to buy a custom length of Excel Control (or whichever rope takes your fancy!)
This is enough rope to rig most dinghies - if you're unsure, just get in touch.
This is our simplest way to keep your control lines tidy and continuous, without adding holes to your hull. Designed for sailors who want neat rigging, fast fitting, and no compromise on performance.
Tested to success - this setup has powered two Graduate National Championship wins using the double tidy takeup system.
For those who love the soft agility of the Aquafleece® as a top layer but would like the added security of a semi-dry construction, Rooster have developed the Rooster Pro Aquafleece®.
Utilising their stretchy waterproof Aquafleece® fabric, Rooster use a heavier fleece lining on the Pro-Aquafleece® top and tape the seams to provide superior warmth and wind/water protection, whilst allowing for free movement. The taped seams protect from any water ingress and when combined with neoprene wrist and waist fastenings, a wide fleecy neck and elasticated drawstring neck closure, it offers the ultimate semi-dry top for protection in the harshest of climates.
The ultimate top layer for all conditions!
We recommend hand washing in warm water.
FEATURES
Warm fleece lining for even more warmth and comfort in the harshest of climates
Taped seams, for added waterproof protection in the body
Wide neck opening with elasticated drawstring neck closure
Soft fleece at neck edge for comfort against your face
Adjustable neoprene waist and wrist seals
Semi dry construction
For those who love the soft agility of the Aquafleece® as a top layer but would like the added security of a semi-dry construction Rooster have developed the Rooster Pro Aquafleece®.
Utilising their stretchy waterproof Aquafleece® fabric, Rooster use a heavier fleece lining on the Pro-Aquafleece® top and tape the seams to provide superior warmth and wind/water protection, whilst allowing for free movement. The taped seams protect from any water ingress and when combined with neoprene wrist and waist fastenings, a wide fleecy neck and elasticated drawstring neck closure, it offers the ultimate semi-dry top for protection in the harshest of climates.
The ultimate top layer for all conditions!
We recommend hand washing in warm water.
FEATURES
The ultimate top layer for all conditions
Combines all the benefits of the Aquafleece with the added security of Semi Dry construction
Upgraded fleece lining for even more warmth and comfort in the harshest of climates
Taped seams to improve water resistance
Elasticated, adjustable neck bungee and neoprene waist and wrist seals
Tried and tested pre-stretched control line for multiple applications. Strong, very low stretch, abrasion resistant and excellent grip - the all round workhorse.
We recommend the 4mm line as a great option for dinghy spinnaker halyards.
It is low stretch, low kink, and runs smoothly (because it is flexible) while gripping well in both hands and cleats (because of its 8 plait construction).
BENEFITS:
Easy line identification
Excellent cleat performance
Good strength
Low elongation
Good abrasion resistance
Do you have a glorious mullet that needs to roam free? Do you get really bad hat hair but need a stiff peak to keep the sun out of your eyes?
Designed to keep the sun out of your eyes and your head cool, the Rooster visor is one of the first items in Fresh’s kitbag .
Designed for water sports use with a plastic reinforced peak and adjustable head band, offering a comfortable fit for many happy hours on the water.
Available in black, white, red, blue, and graphite.
Product care:
Hand wash in warm soapy water and allow to air dry.
Ever found yourself fumbling to get your Tacktick into countdown mode just as the sequence starts? Or wishing you could still see your compass heading while your race timer is running?
We put this together to solve exactly that problem.
This simple bolt-on module lets you mount your Optimum Time “Big Yellow” Race Watch or Windie Race Timer directly onto your Tacktick mast bracket. It keeps everything in one place, so you can see your heading and your countdown at the same time - no more choosing one over the other.
A Proper Secure Fit (No More Tape)
Most flexible cradles work… until they don’t. And nearly everyone ends up taping their watch in to stop it jumping out at the wrong moment.
Instead, we’ve designed a threaded enclosure that holds your race timer securely in place. It won’t shake loose in chop, but it’s still quick and easy to remove once you’re off the water.
No tape. No bodges. No stress.
Designed to Fit Straight On
The hole centres match our standard 3D printed Tacktick Mast Brackets and Cradles, so it bolts straight on. It’s also compatible with OEM Tacktick brackets, so you don’t need to change your existing setup.
If you’re already running a Tacktick and using a “Big Yellow” or a Windie watch, this is a straightforward upgrade that makes race starts that bit easier.
Simple idea. Proper solution. Built by sailors, for sailors.
Bundle the Race Watch Module with a Windie Race Watch to save yourself £10 off RRP
Never Miss a Start - The Windie Timer Race Watch
With a 2 year warranty, waterproof to 50m, shock resistant, and an LCD screen compatible with polarised sunglasses, we’re really excited to bring the Windie Timer race watch to the UK market!
Six different colour options means you can go full custom, match up your watch with your tiller extension, and nail your colour scheme!
An RRP of £64.99 makes the Windie Timer Race Watch incredible value for money!
The Windie Timer Race Watch is an essential piece of equipment for any serious sailor. This professional-grade countdown timer ensures you are perfectly synchronised with the start of every race. It’s engineered for ease of use and reliability, making it a vital tool for competitive sailing.
Available colors: White, Blue, Pink, Yellow, Orange, Green.
SPEC:
65mm ABS case
5,4,1,GO/3/1 minute start sequence options
Shock Resistant Construction
Water Resistant to 5 ATM
Elasticated Strap
Why Choose the Windie Timer Race Stopwatch?
Accuracy: The Windie Timer helps you achieve the most precise timing, which is crucial during racing.
Reliability: The timer is dependable in all conditions, so you can be sure it will work when needed.
User-Friendly: The intuitive design makes the timer easy to operate, even in the heat of competition.
Warranty: Comes with a 2-year warranty.
D12 78 is Marlow's premium range of pre-stretched 12 strand ropes manufactured using bio-based Dyneema SK78.
D12 78 is characterised by it is lightweight, low stretch and high strength making it an ideal rope for the replacement of steel wire. Strength for strength, D12 78 is 8 times lighter than an equivalent steel wire rope and exhibits none of the drawbacks with steel such as corrosion, wire splinters and dangerous recoil in the case of system failure.
D12 78 has Marlow's ArmourCoat coating as standard which increases abrasion resistance and its coefficient of friction.
BENEFITS:
High strength
Low creep
Low elongation
Very light weight
Made with bio-based Dyneema fibre
ArmourCoat improves grip
Easily Inspected
Easily repaired
Easily spliced
Excellent abrasion resistance
Good chemical resistance
Good UV resistance
Minimal recoil
Reduced diameters
Zero water shrinkage
Another staple in the kitbags of Fresh & Marsh, the Rooster PolyPro Sock is a fantastic extra layer to keep your toes toasty, while being thin enough that you can easily wear it under your regular sailing boots without it feeling like a squeeze. In fact, the PolyPro sock generally makes boots easier to slip on as the material offers less friction than your bare foot when pulling your boots on.
Minimalistic lightweight fleece lined socks made using stretchy hydrophobic polypropylene fabric. Perfect to be used on their own for walking, running, etc or as a liner to give a heat boost underneath your sailing, cycling, motorbike, skiing and other socks/boots.
About Polypro™
Rooster Polypro™ is constructed from a combination of Polypropylene (94%) and Elastane (6%). We've brushed the inner fabric surface to give it a thick, fleece-like, high quality texture which feels incredibly warm and soft next to your skin. The resulting garments provides excellent thermal qualities making it the perfect base layer. Polypropylene is naturally hydrophobic, which means the fabric feels remarkably dry, even when wet.
FEATURES
Breathable polypropylene material wicks moisture away from the body
Brushed fleece inner
Quick drying
Rooster Classic Hikers are an iconic part of the Rooster range, being one of the first products brought out.
Both Fresh and Marsh really rate these hikers. They were one of the first bits of kit that each of us bought as juniors that were transformative for our sailing, allowing us to hike more comfortably and race harder.
The Classic Hikers feature 10.5" batten pads at the back of the upper leg, which allow for a good connection with the boat. The battens are made in 3 parts enabling them to shape around the leg for maximum comfort and hiking longevity.
Extra padding at the knee pads provides additional comfort whilst a thinner superstretch neoprene is used behind the knee to ensure a comfortable fit on the majority of leg sizes, and when in bent position.
The ¾ length fit finishes just below the knee and these Hikers also work great when worn over PolyPro Leggings or a Thermaflex Long John for when extra warmth is needed, or Rash legs for UV protection.
We recommend hand washing your hikers in warm soapy water and allowing to air dry.
FEATURES
Adjustable shoulder straps (with ladder buckle)
Low cut front panel
Racer back design for secure fit at shoulders
Material differentiation throughout to aid in hiking performance
Soft elastic binding at waist and leg ends
Fixed 10.5" battens
3D knee panel with superstretch neoprene behind knees for added comfort when sailing downwind and in bent knee position
Duratex IITM seat and knee/shin panels
Pre-register for the 3rd edition of the Colander Cup, with racing to be held at Northampton Sailing Club (Provisional date: 8th May 2027)
Notice Of Race and Sailing Instructions to follow.
If you have any queries, drop us a message on our social media channels or email us on info@fmsailing.co.uk
High strength, lightweight with 100% Polyester cover and D12 Dyneema® core for all round use on halyards, sheets and control lines. Easily tapered and holds well in cleats. Excel Racing is easily identifiable due to distinct range of cover colours and colour matched ArmourCoat core.
BENEFITS:
Excellent UV resistance
Firm round rope aids handling
Good abrasion resistance
Good chemical resistance
High strength
Lightweight
Low elongation
Spliceable
Break Load
4mm - 995kg
Currently available in 4mm, in red or pink. If you want a different colour or diameter, please drop us an email and we can source this.
Admiral Trailers keep things simple, solid, and reliable - exactly what you want when you’re towing a dinghy. Built in the UK with a fully galvanised steel chassis, these road bases are made to last and designed to make life easier on the road.
Key Features:
Axle - Torsion style rubber suspension beams are generally not well suited to carrying relatively lightweight dinghies. They require a heavy load to get them working. For this reason, the Alko soft bump axle is a much better solution. It is more expensive, but due to its unusual shape, designed to start working with much lighter loads.
Lights – The forward facing lights sit just inside the outside edge of the mudguards and provide a reassuring focus point when towing. Especially after dark! LED lightbulbs in this position mean there’s no need to think about changing faulty bulbs.
Adjustable trolley location pin – An adjustable pin is fitted so that you can carry different length launching trolleys.
The 220 road base is adjustable for boats between 10 to 12.5 feet in length.
The 250 road base is adjustable for boats between 10 to 15 feet in length.
The 275 road base is adjustable for boats between 13 to 16.5 feet in length.
Optional Upgrade:
10in wheels – If you’re going to and from the sailing club twice a year then the 8in wheels are perfectly adequate for the trailer. If the plan is to go further afield, cruising or attending open meetings then the 10in wheels are well worth the extra expense. It’s a much smoother, and quieter, ride for you and your dinghy.
All trailers come supplied with mast support, lighting board, and lighting arms included.
Short lighting arms fitted as standard, which are used to mount the lighting board when the road base is towed empty. Once the boat is loaded the lighting arms are stored on the trailer so they are out of the way and the lighting board is attached to the stern of the boat as it normally is.
Long 2.5m lighting arms can be supplied free of charge if required - please contact us when placing your order.
Standard lead time for trollies & trailers is 3-4 weeks. Due to the large size and weight of the trailers, we are unable to post them, we can deliver around the UK but this will be at additional cost.
Sold by the metre, our fluffy daggerboard slot gasket (known colloquially as “polar bear pubes”) is perfect for daggerboard boats such as the Streaker, 29er, Musto Skiff, and Supernova, as well as RS classes such as the RS Vareo, RS600, RS700, & RS800.
Available in 9mm widths, with an option to go for 9mm or 15mm “hair lengths”.
The “wool” is manufactured from environmentally friendly materials, and the adhesive backer is 3M - known for their strong holding adhesives.
Tips for fitting your new gasket:
Make sure the surface is properly prepped, any leftover adhesive from your old gasket must be completely removed, and the surface should be cleaned and fully dry before fitting. If you've got any acetone, or even nail polish remover - that's a great way to clean off any remaining debris from the area.
Make sure the new gasket isn't too cold, the ideal temperature range is between 10°C - 35°C. If the glue is too cold it will not adhere properly. The gasket and hull area can be lightly warmed with a hairdryer or a heat gun (on a low setting) if the temperature is too low.
After applying the gasket to your daggerboard case, press along the length of the gasket firmly to help the glue to adhere.
Allow enough time for the glue to fully set. It should take approx. 24 hours, possibly longer if it is outside the ideal temperature range, so this is not something you want to be doing on the first morning of your national championships. Give yourself plenty of time and get it done sooner rather than later!
Replacement flexible universal joint for tiller extension - twist off mechanism.
Comes with tiller arm attachment and cover.
The D‑Splicer needle is a simple, reliable tool for splicing thin sailing ropes, especially anything under 5 mm where standard fids struggle. It’s ideal for dinghy sailors, riggers, and anyone working with modern low‑diameter lines like Dyneema, Spectra, and control ropes.
Each kit includes:
4 interchangeable D‑Splicer needles
1 ergonomic handle
Easy push‑fit needle system for quick swaps
The slim, rigid needles make it easy to pull rope tails through tight braids, giving you neat, secure splices without the usual fight. A great bit of kit to keep in your toolbox or onboard for quick, tidy ropework.
Marlow’s cordless hot knife is a quick, reliable way to cut and heat‑seal rope without frayed ends or loose fibres. The blade reaches 400°C in seconds, giving you clean, professional results whether you’re in the workshop, on the boat, or working shoreside.
This kit is fully portable and comes in a tough carry case with:
KD‑DC100R handle
14.4V / 2.0Ah rechargeable battery pack
Cleaning brush
Ideal for sailors, riggers, club workshops, and anyone who regularly trims rope, lines, or webbing. A solid, go‑anywhere tool that makes rope work faster, neater, and far less hassle.
Perfect for dinghy sheeting systems, the Allen Pro-Ratchet 60mm block featuring “wave sheave” technology is a bit of a game-changer…
The most effective way to increase friction is to add sharp edges to the ratchet sheave, but this quickly deteriorates and wears away the rope. So, after working alongside leading rope manufacturers the Allen design team came up with a simple solution which improves grip without chewing away at your expensive rope.
The Wave sheave has an offset V-style grip, made from hard-wearing recycled plastic nylon, which does not have sharp edges that will eat into the line. Instead, by adjusting the V formation in the sheave to be slightly offset, the ratchet now grips the line at additional points around the sheave, resulting in more grip.
The wave sheave not only improves grip but as a result of the design it also allows for a less ‘jumpy’ feel when easing the sheets.
Wave Sheave – The wave sheave offers 20 to 40%* more grip without adding any additional wear to the rope. We recommend pairing this ratchet block with 7mm Marlow Excel Marstron Plus.
Switchable – In the middle of the block is a switch that can be used, even under load, to turn the ratchet mechanism on or off. Giving you more control and feel of your control system.
Swivel Lock – The swivel can be locked in 90-degree orientations via the small black swivel lock at the top of the block. Alternatively, the swivel can be set to spin freely.
Tii-Holes – The centre of the block features 4 holes to reduce weight as well as give options for tying elastic or rope through.
Maximum Working Load = 275kg. If exceeded the block may not perform as designed.
Breaking Load = 1000kg. The load at which a major block failure is likely to occur.
*Depends on the type of rope in use with the sheave.
The Prism is a stripped down racing compass.
Class legal anywhere an electronic compass is legal, the Prism provides superior accuracy, and a massive display all in an ultralight, compact package.
LIGHTWEIGHT
At a mere 137 g (4.8 oz) it is the world's lightest racing compass.
MASSIVE DIGITS
The Prism’s sunlight-readable, high-contrast LCD screen features 29.8mm (1.1”) tall digits in a font that’s optimised for readability. This means that if your boat’s under 40ft long you’ll be able to mount the Prism on your mast and read it easily from anywhere in the cockpit, even if you don’t have perfect vision.
ULTRA-WIDE VIEWING ANGLE
With 250° of visibility the Prism’s LCD's can be easily read from the helm to the trapeze wire.
FLEXIBLE & SECURE MOUNTING
The Prism mounts to your boat via the slide-in cradle. The Prism Cradle can be mounted to a wide array of brackets, directly to a mast using the centreline holes and the Mast Bracket Hardware Kit, or directly to a bulkhead. We even included recesses in the cradle in case you need to lash your compass in place.
The best distance-to-line tool ever just got better, with crystal clear optics, zero-latency navigation, and multicolor backlight.
Sailing World called the Classic ProStart possibly the greatest electronic racing gadget of this decade, and Practical Sailor gave it their prestigious Editor's Choice award. Now we're taking this legendary product to the next level with some major upgrades.
Highly Visible in All Conditions
A bonded Gorilla® Glass display with razor sharp white on black digits shows up crystal clear through your favorite polarized sunglasses. A user selectable white / red LED backlight takes care of night sailing or other low light situations.
Zero-Latency Aerospace-Grade Navigation
A powerful 72 channel, 18Hz multi-constellation GPS receiver combined with a 100Hz solid-state 6-axis inertial measurement unit (IMU) and a patented high-precision 3-axis geomagnetic sensor gives you accurate distance, speed and heading information with zero lag time.
Better off the water too…
100-Hour Li-Ion Battery
A battery that you can charge using any USB port or phone charger and then forget about for the rest of the week gives you one less thing to worry about on race days.
High-Speed, High-Capacity Data Logging
The ProStart records position, time, course over ground, speed over ground, magnetic heading and heel angle four times per second. The 8GB onboard flash memory is enough room for 1000 hours of sailing data.
Replay Anywhere
When you plug the new ProStart into any Mac, PC or Linux computer it shows up as an external drive with your track files on it. You can drag and drop these files into browser based replay software like Charted Sails or Njord Analytics, without having to install anything on your computer.
WATCH THE VELOCITEK PROSTART INTRODUCTION VIDEO HERE
The new ProStart, running firmware version 35, automatically calculates the magnetic bearing the starting line is square to. This allows you to easily compare the line square to bearing to a head-to-wind bearing on your compass. Do this every start and you'll save your self the hassle of running the line and quick calculations in your head.
To display ‘Line Square To’ bearing, press the MODE and MAX buttons at the same time.
‘Line Square To’ is calculated as the magnetic bearing from the right end of the line to the left end of the line plus 90°
The all-new SpeedPuck. The GPS speedometer for sailing. With a 30 hour battery and a faster, more accurate GPS module the SpeedPuck is better than ever.
What’s Included:
Velocitek SpeedPuck
USB Cable
Quick Start Guide
Mounting Cradle
Extra USB Port Lid
BIG NUMBERS. INSTANT INSTALLATION.
The SpeedPuck is a simple GPS speedometer created for sailing but can be used in any sport or situation where you want to see your speed easily. The SpeedPuck has big numbers that are easy to read, it can be installed very quickly and it gives you the accuracy and responsiveness you need.
EASY TO READ
The SpeedPuck’s sunlight-readable, high-contrast LCD screen features 27mm (1.1”) tall digits in a font that’s optimized for readability. This means that if your boat’s under 40ft long you’ll be able to mount the SpeedPuck on your mast and read it easily from anywhere in the cockpit, even if you don’t have perfect vision.
ACCURACY YOU CAN COUNT ON
The award-winning SpeedPuck is completely self-contained and can be installed in seconds, without tools. Instead of using a paddlewheel, the SpeedPuck calculates your speed by measuring the Doppler shift in GPS signals to provide you with an updated reading four times a second. The SpeedPuck never needs to be calibrated and maintains uniform accuracy at all speeds.
The SpeedPuck uses the same GPS technology as the Velocitek ProStart, which is used by all America’s Cup World Series teams.
SEE WHAT YOU CAN’T FEEL
A less than half-knot change in boat speed doesn’t feel like much and that’s a problem. The SpeedPuck gives you a new speed measurement four times a second! If you wander into adverse current or your crew on the rail start slacking, the SpeedPuck will tell you right away.
HIT THE WATER. NOW.
Nobody wants to read a manual. We designed a product that anyone can figure out and start using in a few minutes, so you can spend more time on the water.
WATERPROOF
The SpeedPuck is designed for long-term reliability in a saltwater marine environment. Its case back screws off like the lid of a leak-proof water bottle to reveal the watertight USB port cover.
The SpeedPuck's USB port is also sealed off from the rest of the device's electronics, providing second and third layers of protection against moisture.
ONBOARD BATTERY
A rechargeable 30-hour Li-Ion battery gives you a weekend's worth of battery life on a single charge.
Neoprene sleeve bottle holder with adjustable webbing straps at each end to fit around different circumferences of tube. Can be attached to various parts of the boat to store drinks when sailing. The bottle holder features an oval hole to be able to slide the bottle in with one hand. Can fit most bottles up to 1L in size. The Joey bottle holder is approx 38cm long